| KS D 3585 (JIS G 3447) |
ASTM A 270 |
|
Out Diameter (mm)
|
Wall Thickness (mm) |
Weight (kg/m) |
Tolerance (mm) |
Out Diameter (mm)
|
Tolerance (mm) |
| Out Diameter |
Wall Thickness |
Length |
Out Diameter |
Wall Thickness |
Length |
25.4 |
1.2 |
0.723 |
±0.15 |
±10% |
+10 -0 |
25.4 |
+0.05 -0.20 |
±12.5% |
+3.2 -0 |
| 31.8 |
1.2 |
0.915 |
±0.16 |
- |
- |
| 38.1 |
1.2 |
1.10 |
±0.19 |
38.1 |
+0.05 -0.20 |
| 50.8 |
1.5 |
1.97 |
±0.25 |
50.8 |
+0.05 -0.28 |
| 63.5 |
2.0 |
2.47 |
±0.25 |
63.5 |
| 76.3 |
2.0 |
3.69 |
±0.25 |
76.2 |
+0.08 -0.30 |
| 89.1 |
2.0 |
4.33 |
+0.30 -0.40 |
- |
- |
| 101.6 |
2.6 |
6.41 |
+0.35 -0.40 |
101.6 |
+0.08 -0.38 |
Longueur: 6000mm (selon les besoins) Artisanat: recuit brillant, perle intérieure enlevée, polissage intérieur et extérieur. Utilisation: Industrie laitière et alimentaire, profession de fabrication de médicaments (industrie pharmaceutique), industrie de l'eau pure, ingénierie électronique, fibre, fabrication de papier, brassage de bière, industrie du gaz à haute pureté, industrie cosmétique, etc ... \ n \ n  \ n  Composition chimique \ n
| Grade |
Chemical Composition |
| C max |
Si max |
Mn max |
P max |
S max |
Ni |
Cr |
Mo |
Others |
| TP 304 |
0.08 |
0.75 |
2 |
0.04 |
0.03 |
8 - 11 |
18 - 20 |
|
|
| TP 304L |
0.035 |
0.75 |
2 |
0.04 |
0.03 |
8 - 13 |
18 – 20 |
|
|
| TP 316 |
0.08 |
0.75 |
2 |
0.04 |
0.03 |
10 - 14 |
16 – 18 |
2 – 3 |
|
| TP 316L |
0.035 |
0.75 |
2 |
0.04 |
0.03 |
10 - 15 |
16 - 18 |
2 - 3 |
|
\ n
| Mechanical Properties |
| Grade |
Tensile Strength Mpa,( 54686090,Min) |
Yield Strength Mpa,( 54686091,Min) |
%Age Elongation in 50mm gauge length min |
Hardness (Max) |
| BHN |
Rb |
| 304 |
585 |
244 |
56 |
191 |
72 |
| 304L |
585 |
210 |
56 |
191 |
72 |
| 316 |
615 |
245 |
57 |
197 |
75 |
| 316L |
585 |
215 |
56 |
197 |
75 |
\ n \ n Peut-être aurez-vous besoin d'un autre tube de forme \ n SÉRIE SQUATR & TUBE RECTANGULAIRE \ n
TUBE O.D. mm |
TUBE WALL THICKNESS (mm) |
FINISH |
LENGTH (mm) |
10 × 10 × -15 × 15 |
0.5-1.5 |
A)No-Polish
B)240-600 Grit
c)800#-1000# Super Mirror finish
D)Titanium finish
|
6000/6200/cut length
Special cut length available
Lengths,Cutting,De-burring
|
16 × 16 × -25 × 25 |
30 × 30 × -35 × 35 |
0.7-2.5 |
50 × 50 × -80 × 80 |
1.0-4.0 |
90 × 90 × -150 × 150 |
|
20 × 10-30 × 15 |
0.5-1.5 |
38 × 25-40 ×6 0 |
0.6-2.5 |
75 × 45-120 × 60 |
1.0-4.0 |
120 × 60 above |
1.5-4.0 |
\ n DEMI-RUBAN TUBE (D-TUBE) \ n
| TUBE O.D. mm |
TUBE WALL THICKNESS
(mm)
|
FINISH |
LENGTH (mm) |
|
62.7 × 32.4 |
1.5-2.0 |
Mill
Polished
(All standard brushed to buffed.
We will match finishes) |
6000/6200/cut length
Lengths,Cutting,De-burring |
\ n Special Shpes: rond, carré, rectangle, personnalisé, "T" "D", trilobal, plat ovale, elliptique, etc \ n \ n  \ n Pack d'exportation standard et sécurisé \ n
| A: Each tube SLEEVED in a plastic bag, then put in cardbox with strips.(For Cut To Length Small Tubes) |
| B: Each tube SLEEVED in a plastic bag, then packed in bundles/steel crates. |
C: Each tube SLEEVED in a plastic bag, then packed in cardboard tubes,both sides with end cap,lastly packed in steel crate. |
\ n
Remarks: |
1)Lenght(M): 6 (or cut-to-length) |
| 2)Payment:T\T |
| 3)Price Terms: FOB Foshan/Shenzhen/HuangPu/HK(China Port); CIF/C&F |
| 4)Delivery :13-45days after deposite,balance before shippment.(based on QTY) |
| 5)OEM/Buyer Lable accepted. |
| 6)Mill test certification offered. |
| Special Remark |
Channel/Flat Bar/Angle Bar/Round Bar/Fittings/Accessories enquiries are warmly welcomed. |
\ n \ n \ n \ n
Product |
diameter |
thickness |
material |
tolerances |
Stainless steel welded pipe |
Φ12.0-Φ300mm |
0.8-3.0mm
|
304, 316,201,202 |
±0.1-0.2mm |
|
Features:
1, the use of arc welding technology, internal argon gas protection weld formation, does not crack. Can be bent, necking, flaring, flanging process.
2, the surface finish: matte, 180g, 320g, 400g, 600g polishing.
3, can produce food-grade stainless steel, polished inside and outside.
|
\ n Groupes de Produits : Raccord de tuyau soudé bout à bout
|
\ n 
Tuyau sanitaire / tuyau inoxidable \ n \ n Tuyau soudé par acier inoxydable 1.Grade: 300series 2.Standards: ASTM A249, A554, A270 3.OD: 16-219mm WT: 0.8-4.0mm 4.Manufacture \ n \ n Standard : JIS G3447 ASTM A270 ASME SA270 Haute qualité: 304 304L 316 316L \ n \ n \ n 
\ n 
Composition chimique \ n 
\ n Pack d'exportation standard et sécurisé \ n 
